Fendt 700 Vario – Versatility

Mounting Areas

The ideal line when grubbing, pass-to-pass accuracy when sowing, the perfect cut when mowing – with the Fendt 700 Vario, your work nears perfection and you will be highly satisfied with the results. The numerous interfaces and automated functions offer you maximum versatility for mounting implements. Powerful hydraulics facilitate and expand the areas of application for maximum efficiency and the best productivity.

Powerful hydraulics

With a delivery capacity of 193 litres per minute, the load-sensing pump on the Fendt 700 Vario provides high volume capacity for the hydraulics. These pumps for the Profi and ProfiPlus variants have an easy time with the most demanding implement operations. Additional pumps with a delivery capacity of 152 l/min and 109 l/min (Power) perform strongly with all implements. These pump capacities permit the engine speed to be kept low, which saves fuel effectively, even during demanding operations.

Electric hydraulic oil filter monitoring provides assistance, for example, through fast fault diagnostics. It also shows the next maintenance intervals, which are twice as long, thanks to the monitoring. The long-lasting hydraulic oil is due to the benefits of the separate transmission oil and hydraulic oil supplies, since oil cannot mix and dirt is prevented from entering the transmission.

Full function for front and rear

The Fendt 700 Vario offers you the best solutions for your individual requirements in three equipment variants – Power, Profi and ProfiPlus. A number of features and mounting areas are already found in the front alone: top link, up to two double-acting control valves, unpressurised return front, seven-pin socket, front PTO (1000 rpm), EPC front linkage incl. shock load stabilising, lower link catch hooks, foldable lower links, shut-off cock.

The front linkage is fully integrated in the half-frame and therefore especially stable. The lower links on the front linkage can be folded up diagonally – which provides more free space for front loader work.

The integrated front PTO delivers 1000 rpm. The direct drive line from the engine to the implement means high efficiency. Another advantage of the foldable lower links is that implements can be attached closer to the tractor and access to the front tyres is better.

The load relief control for the front linkage is a particular advantage when operating a snow plough or a front mower in grassland operations, since implement guidance can be quickly adjusted to uneven surfaces.

Both the DCUP and CUP couplings permit the hydraulic valves to be coupled under pressure; mounting and removing implements is easy. The self-closing valve flaps offer secure protection against contamination through dirt or water.

Comfort front power lift with load relief control

Complete hydraulics

Rear mounting area for many implements.

The right speed

No matter which PTO implement, on the Fendt 700 Vario you can demand power exactly as it is needed. Four PTO speeds with 540, 540E, 1000 and 1000E rpm are available. The new 1000E PTO provides optimal power transmission for implements with a high speed demand and simultaneously a low power requirement, for example, operations with a rotary harrow, slurry pump or sprayer.

More pressure with power beyond

The power beyond connection comprises a pressure line, a control line and a return for hydraulic oil. The control line regulates the output of the hydraulic pump dependent on the oil requirement of the implement. The line has an especially good flow for high hydraulic oil volumes. The oil is transported directly to where it is needed, quickly and without power losses.

Compressed air Duomatic coupling

Fast hitching and unhitching of implements made easy: The Duomatic coupling connects compressed air brake lines from trailers or loading wagons with just one hand movement.

External controls at the rear

The externally operated functions at the rear simplify coupling and uncoupling implements when standing. The rear linkage and the PTO can be operated from both sides. One control unit, for example for the hydraulic top link, can be operated on the rear left side.

Cable lead-through

Cables can be led into the cab from the outside, neatly and through the closed rear window. The cable lead-through protects the inside of the cab against dirt, water and noise.

PTO rear

Rear PTO with 540, 540E, 1,000 and 1000E rpm speeds The external PTO actuation at the rear is especially convenient.

Automatic steering axle lock

The optional automatic steering axle lock automatically unlocks the steering axle at a predefined speed on trailers with self-steering axles. On straight stretches, the rigid self-steering axle ensures stable handling. Operators do not need to lock the self-steering axle manually outside of the preselected speed range and when reversing.

Just lifting weight would be too easy…

The Vario and Cargo form a perfect unit

The 700 Vario is ideal for front loader work. The upward viewing angle has been tripled thanks to the new front windscreen. Operators have the front loader in full view, even when it is raised. The front window of the 700 Vario can be fully opened at any time while the front loader is in use. That makes front loader work a true pleasure.

Optimal operating interface concept

The controls for the Fendt Cargo are optimally integrated in the overall operating interface on the right armrest and in the Varioterminal: you control the front loader with your right hand on the crossgate lever, your left hand is free for steering and reversing and you can control the travel speed with your foot. The CargoProfi represents the absolute pinnacle in front loader operation.

Torsion-resistant arm for rugged jobs

Smart functions of the CargoProfi

The new Fendt CargoProfi* is the consistent further development of the tractor and front loader unit. New measuring and tilt sensor systems as well as a job computer enable new functions. These are a weighing function for individual and total weight, for example, for monitoring when loading salt or gravel, as well as the memo function for saving the positions of the arm and attachment or also a shaking function. The settings are easy to adjust and view in the Varioterminal.

*available for the front loader models 5X/85 and 5X/90

On the CargoProfi, for example, the tipping angle can be limited when loading very high trailers. The Memo function is especially practical for repeating sequences, for example, the horizontal lower position can be targeted automatically. The weighing function permits monitoring of the weight of the load.