Kverneland Taarup 9580 C – 9584 C – 9590 C Hydro

Heavy Duty Centre Swath Rakes

The Kverneland Taarup 9580 C, 9584 C and 9590 C Hydro are heavy duty two-rotor rakes with working widths up to 8.0, 8.4 and 9.0m respectively. They are designed for the toughest conditions and feature a high performance oil-bath gearbox and a strong carrier frame. The hydraulically adjustable working and swath width and ability to make sharp turns of up to 80° are important features of these rakes.

Due to the Hydro axle Kverneland Taarup 9590 C Hydro has a transport height of less than 4.0m, even without detaching the tine arms.

The Kerneland 9580 C with newly designed wheel axles provide a transport width below 4m, even with tine arms mounted.

The Advantages:

  • Working widths of 8.0, 8.4 and 9.0m.
  • ProLine oilbath gearbox.
  • TerraLink Quattro for perfect ground followings.
  • Hydraulically adjustable working width.
  • Active wheel steering with 80° turning angle for easy manoeuvrability.

Technical Specifications

Working Width Tine Arms Weight
9580 C 7.00 – 8.00m 2×12 2065kg
9584 C 7.60 – 8.40m 2×12 1950kg
9590 C Hydro 8.00 – 9.00m 2×14 2310kg

ProLine Gearbox

  • The ProLine rakes feature a unique drive system which comprises oil-immersed pinion and crown wheels.
  • The fully enclosed design ensures full and permanent lubrication, and makes the entire system absolutely maintenance-free.
  • The hardened cam track is adjustable, and features a flat curve and an extremely large 400mm diameter, providing positive guidance to the steel rollers, and promoting quiet machine running.
  • Aluminium bearing housings, with two integral ball bearings and wide support, provide solid and maintenance-free tine arm mounting.

Manoueuvrability

  • The rear carrier frame with controlled steering facility allows tight turns on headlands and loss free swathing, even in awkwardly shaped fields.
  • Even if the rotors are lifted on a steep slope, the steering system reliably counteracts any deviation.
  • The ability to make sharp turns up to 80° and the cross stabilizer in the headstock are unique Kverneland features.

TerraLink Quattro

  • Kverneland rotary rakes are designed to do well-shaped and clean swaths, achieved by precision in every part of the raking.
  • The ground contour following ability is important to avoid dirt in the swath – especially in uneven field conditions.
  • The TerraLink Quattro system controls the rotor in 3 dimensions, with a unique combination of an undercarriage with 4 wheels and a specially designed rotor suspension system. This ensures superb raking performance, even at higher forward speeds.
  • Maintenance-free system – no pivots or joints to wear out.
  • Automatic rotor suspension, ensuring smooth operation.
  • Built-in pressure bias on front wheels prevents lifting and tine bounce.
  • Optimum ground following for clean raking at high forward speeds. All wheels are positioned close to the tines.

Hydraulically Adjustable Working Width

  • The Kverneland Taarup centre swath rakes offer hydraulic adjustable working width.
  • This enables varying swath width, ensuring a perfect match to the pick up width of loader wagons, balers and foragers.
Working Width Swath Width
9472 C 6.20 – 7.20m 1.20 – 2.20m
9476 C 7.00 – 7.80m 1.20 – 2.20m
9580 C 7.00 – 8.00m 1.20 – 2.20m
9584 C 7.60 – 8.40m 1.30 – 2.10m
9590 C Hydro 8.00 – 9.00m 1.20 – 2.20m
95110 C 9.30 – 11.00m 1.40 – 3.10m