Sheep Float Folding Decks

Stewart's livestock floats may be fitted with sheep decks. These folding aluminium decks are designed to be simple to fit and remove.

Stewart has been manufacturing quality livestock floats for more than two decades. Each float is designed and constructed exactly as the individual customer requires it. Your new float can be built to fit an existing trailer, or can be supplied with a trailer.

Livestock floats for cattle, sheep or pigs start from 16 feet in length. For strength and durability, Stewart favours an all-aluminium, welded container. Aluminium is lightweight but very robust, while the fully-welded design prevents effluent from leaking through into the trailer, and ensures easier cleaning.

The sheep decks are folding aluminium sheep decks, the deck is the length of the pen.
The folding decks are supported by aluminium deck bars and are pressed to minimise leakage of euent to the lower deck.
The deck in the rear section is a hydraulically operated run up ramp to the second sheep deck.
The cattle dividing doors are fixed position with slam shut catches. The sheep doors are incorporated in the cattle doors.

Quick and Easy to Deck the Float

Cattle floats can not be retrospectively fitted with sheep decks.
The sheep decks are all aluminium section decks and store in the float when not in use.
The decks are fabricated in two feet sections; each section is constructed of an aluminium box section frame sheeted with aluminium treadplate.
Each section of deck stores in the roof without the need to slide the sections from back to front and is held in place with one pin, making the process of decking the float quick and simple.
The sheep dividing doors are fabricated using pressed aluminium sheets.

Specifications

Model	LENGTH(M)	NUMBER OF SHEEP DOORS(SECTION SIZES (M))	Product Brochure
GX 20 SF	6.10	1 (3.05, 3.05)	Download
GX 26 SF	7.90	2 (3.00, 2.45, 4.25)	Download
GX 30 SF	9.10	2 (3.03, 3.03, 3.03)	Download
GX 36 SS	10.90	2 (3.63, 3.63, 3.63)	Download